Miniature Ultrasonic Integrated Sensor
Top appearance
Frontal appearance
|
Supply voltage |
DC12V ±1V |
|
|
Signal output |
RS485 |
|
|
Protocol |
Standard MODBUS protocol, baud rate 9600 |
|
|
Power consumption |
0.6W |
|
|
Working temperature |
-40-80℃ |
|
|
Working humidity |
0-100%RH |
|
|
Standard cable length |
2.5m |
|
|
Protection class |
IP65 |
|
|
Wind speed
|
Measuring range |
0-40m/s |
|
Measurement accuracy |
±0.5+2%FS |
|
|
Resolution |
0.01m/s |
|
|
Wind direction
|
Measuring range |
0-359° |
|
Measurement accuracy |
±3° |
|
|
Resolution |
1° |
|
|
Atmospheric temperature
|
Measuring range |
-40-100℃ |
|
Measurement accuracy |
±0.5℃ |
|
|
Resolution |
0.1℃ |
|
|
Atmospheric humidity
|
Measuring range |
0-100%RH |
|
Measurement accuracy |
±3%RH |
|
|
Resolution |
0.1%RH |
|
|
Atmospheric pressure |
Measuring range |
10-1100hPa |
|
Measurement accuracy |
±1.5hPa |
|
|
Resolution |
0.1hPa |
|
(1) If equipped with the weather station produced by our company, directly use the sensor cable to connect the sensor to the corresponding interface on the weather station.
(2) If the transmitter is purchased separately, the matching line sequence of the transmitter is as follows:
|
Line color |
Output signal |
|
Communication type |
|
|
Red |
Power positive |
|
Black (green) |
Power ground |
|
Yellow |
A+/TX |
|
Blue |
B-/RX |
1. When detecting the output, the display instrument value is 0 or not within the range. Check whether the ultrasonic wind speed and direction are blocked by foreign objects. The collector may not be able to obtain information correctly due to wiring problems. Please check whether the wiring is correct and firm.
2. If it is not for the above reasons, please contact the manufacturer.
Related products
-
Pressure (Level) Transmitters Liquid Level Sensor
Features ● No pressure hole, no cavity plane structure; ● A variety of signal output forms, voltage, current, frequency signals, etc.； ● High precision, high strength; ● Hygienic, anti-scaling Technical indicators Power supply: 24VDC Output signal: 4~20mA, 0~10mA, 0~20mA, 0~5V, 1~5V, 1~10k...
-
Three Temperature and Three Humidity Soil Moist...
Soil Moisture Sensor 1. Introduction The soil moisture sensor is a high-precision, high-sensitivity sensor that measures soil temperature. Its working principle is that measuring soil moisture through FDR (frequency domain method) can correspond to soil volumetric moisture content, which is a soil moisture measurement method that conforms to current international standards. The transmitter has signal acquisition, zero drift an...
-
Portable pump suction single gas detector
System Description System configuration 1. Table1 Material List of Portable pump suction single gas detector Gas Detector USB Charger Please check materials immediately after unpacking. The Standard is necessary accessories. The Optional can be chosen according to your needs. If you have no need to calibrate, set the alarm parameters, or read the alarm record, don’t purchase the optional acc...
-
Single-point Wall-mounted Gas Alarm
Technical parameter ● Sensor: catalytic combustion ● Responding time: ≤40s (conventional type) ● Work pattern: continuous operation, high and low alarm point(could be set) ● Analog interface: 4-20mA signal output [option] ● Digital interface: RS485-bus interface [option] ● Display mode: Graphic LCD ● Alarming mode: Audible alarm -- above 90dB; Light alarm -- High intensity strobes ● Output control: re...
-
Fixed single gas transmitter LCD display (4-20m...
System Description System configuration Table 1 bill of materials for standard configuration of fixed single gas transmitter Standard configuration Serial number Name Remarks 1 Gas transmitter 2 Instruction manual 3 Certificate 4 Remote control Please check whether the accessories and materials are complete after unpacking. Standard configuration is a ne...
-
Single-point Wall-mounted Gas Alarm (Chlorine)
Technical parameter ● Sensor: catalytic combustion ● Responding time: ≤40s (conventional type) ● Work pattern: continuous operation, high and low alarm point(could be set) ● Analog interface: 4-20mA signal output[option] ● Digital interface: RS485-bus interface [option] ● Display mode: Graphic LCD ● Alarming mode: Audible alarm -- above 90dB; Light alarm -- High intensity strobes ● Output control: rel...
