CLEAN CON30 Conductivity Meter (Conductivity/TDS/Salinity)
●Boat-shaped floating design, IP67 waterproof grade.
●Easy operation with 4 keys, comfortable to hold, accurate value measurement with one hand.
●Extra large measurement range: 0.0 μS/cm - 20.00 mS/cm; minimum reading: 0.1 μS/cm.
●Auto range 1-point calibration: free calibration is not limited.
●CS3930 Conductivity Electrode: Graphite electrode, K=1.0, accurate, stable and anti-interference; easy to clean and maintain.
●The temperature coefficient of automatic temperature compensation can be adjusted: 0.00 - 10.00%.
●Can carry out throwing water quality measurement (automatic locking function)
●Easy maintenance, the battery and electrodes can be easily replaced without any tools.
●Backlit screen, multi-line display, easy to read.
●Self-diagnosis display of electrode efficacy status
●1*1.5 AAA battery with long life
●Automatic shutdown after 20 minutes without any key action
| Measurement range | 0.0 μS/cm (ppm) - 20.00 mS/cm (ppt) |
| Resolution | 0.1 μS/cm (ppm) - 0.01 mS/cm (ppt) |
| Accuracy | ±1% F.S. |
| Temperature measurement range | 0 - 100.0 °C / 32 - 212 °F |
| Operating temperature range | 0 - 60.0 °C / 32 - 140 °F |
| Temperature Compensation Range | .0 - 60.0 °C |
| Temperature Compensation | Auto/Manual |
| Temperature coefficient | 0.00 - 10.00% adjustable (factory 2.00%) |
| Base temperature | 15 - 30°C adjustable (factory 25°C) |
| Calibration method | Auto range 1 point calibration |
| TDS measurement range | 0.0 mg/L (ppm) - 20.00 g/L (ppt) |
| TDS coefficient | 0.40 - 1.00 adjustable (factory coefficient: 0.50) |
| Salinity measurement range | 0.0 mg/L (ppm) - 13.00 g/L (ppt) |
| Salinity factor | 0.65 |
| Conductivity electrode | CS3930 Φ13mm , K=1.0 |
| Screen | 20 * 30 mm multi-line LCD display |
| Protection level | IP67 |
| Auto backlight | 1 minute |
| Automatic shutdown | 5 minutes |
| Power supply | 1x1.5V AAA7 battery |
| Dimensions (H×W×D) | 185×40×48 mm |
| Weight | 95g |
Related products
-
Pressure (Level) Transmitters Liquid Level Sensor
Features ● No pressure hole, no cavity plane structure; ● A variety of signal output forms, voltage, current, frequency signals, etc.； ● High precision, high strength; ● Hygienic, anti-scaling Technical indicators Power supply: 24VDC Output signal: 4~20mA, 0~10mA, 0~20mA, 0~5V, 1~5V, 1~10k...
-
LFHC-TBQ Total Radiation Sensor
Application This sensor is used to measure the spectral range of 0.3-3μm, solar radiation, can also be used to measure the incident solar radiation to the slant of the reflected radiation can be measured, such as the induction downwardly facing, light shielding ring measurable scattered radiation. Therefore, it can be widely applied to the use of solar energy, meteorology, agriculture, building materi...
-
Single-point Wall-mounted Gas Alarm
Structure chart Technical parameter ● Sensor: electrochemistry, catalytic combustion, infrared, PID...... ● Responding time: ≤30s ● Display mode: High brightness red digital tube ● Alarming mode: Audible alarm -- above 90dB(10cm) Light alarm --Φ10 red light-emitting diodes (leds) ...
-
Single-point Wall-mounted Gas Alarm (Carbon dio...
Technical parameter ● Sensor: infrared sensor ● Responding time: ≤40s (conventional type) ● Work pattern: continuous operation, high and low alarm point(could be set) ● Analog interface: 4-20mA signal output [option] ● Digital interface: RS485-bus interface [option] ● Display mode: Graphic LCD ● Alarming mode: Audible alarm -- above 90dB; Light alarm -- High intensity strobes ● Output control: relay o...
-
Single Gas Detector User’s
Prompt For security reasons, the device only by suitably qualified personnel operation and maintenance. Prior to the operation or maintenance, please read and fully manage all solutions to these instructions. Including operations, maintenance of equipment and process methods. And a very important safety precautions. Read the following Cautions before using the detector. Table 1 Cautions Cautions ...
-
Three Temperature and Three Humidity Soil Moist...
Soil Moisture Sensor 1. Introduction The soil moisture sensor is a high-precision, high-sensitivity sensor that measures soil temperature. Its working principle is that measuring soil moisture through FDR (frequency domain method) can correspond to soil volumetric moisture content, which is a soil moisture measurement method that conforms to current international standards. The transmitter has signal acquisition, zero drift an...
